Rust Remover (1L)
Customer Reviews
Just as expected for Smartseal the rust remover worked extremely well. All of the Smartseal products I've tried are far better than any other products you buy from the big well known DIY stores.
Perfect result from the rust remover
An efficient and effective rust remover which made a real difference to our concrete paving.
Bought this to remove an awful stain on outside porcelain tiles, caused by a metal tray under a chiminea. Water, metal and heat left a huge blackened rusty circle on the tiles. It took quite a few applications of this product but its worked a treat. Absolutely delighted with the final result,
Very speedy delivery. Excellent results from the rust remover product.
Great product, great service from Smartseal. THX Follow the instructions and don't cut the corners for good results. 101% recommended ..... simple as that.
HAVE A QUESTION?
Description
Smartseal Rust Remover is effective for dissolving problematic rust stains caused by iron-containing fertilizers, metal garden furniture, leaking heating systems, etc on natural stone and concrete surfaces. It can be used externally on patios, driveways and walls as well as internal surfaces if necessary. The fast-acting formulation will start to work straight away after application as it starts to attack and neutralise any rust stains present. Within minutes the powerful chemical formula creates a purple coloured reaction where the rust stains were so you can see the rust remover working. The acid-free formulation is PH neutral and will not damage the natural stone or concrete after application.
- Simply Brush on & Wash Off
- Fast Acting
- Suitable for Concrete & Natural Stone
- Brick & Masonry Cleaner
- Cleans Cement & Mortar Residues
- Ready To Use
Technical
- Advanced pH neutral formula (non-acidic).
- Suitable for use on internal and external natural stone and surfaces.
- Safe, ready to use formula.
- Fast acting without causing damage to the surface of the stone or concrete.
- Easy application by brush.
- Ready to apply. No dilution necessary.
Directions for use:
- Generously apply neat to a dry surface and work in with a brush. A purple discolouration shows the start of the reaction.
- Allow to work for about 5 min, 10 minutes maximum. Do not allow the product to dry.
- After working time, rinse off with plenty of water.
- Important: working time must not exceed 10 minutes.
- Repeat procedure if required. Some stone & concrete may change colour after treatment.
Bought this to remove some rust on our stone work,it worked great,all gone now thankyou.